STA8089GA is a single die standalone positioning receiver IC working on multiple constellations (GPS/Galileo/GLONASS/BeiDou/QZSS).
STA8089GA is compliant with ST Automotive Grade qualification which includes in addition to AEC-Q100 requirements a set of production flow methodologies targeting zero defect per million.
STA8089GA, fulfilling high quality and service level requirements of the Automotive market, is the ideal solution for in-dash navigation and OEM telematics applications.
The device is offered with a complete GNSS firmware which performs all GNSS operations including tracking, acquisition, navigation and data output.
STA8089GAD can run also TESEO-DRAW the STMicroelectronics dead reckoning firmware.
**Key Features**
AEC-Q100 qualified
STMicroelectronics® positioning receiver with 48 tracking channels and 2 fast acquisition channels supporting GPS, Galileo, GLONASS, BeiDou and QZSS systems
ST DRAW (Dead Reckoning Automotive Way) supported (STA8089GAD Only)
Pin to pin compatible with STA8088GA
Single die standalone receiver embedding RF Front-End and low noise amplifier
-162 dBm indoor sensitivity (tracking mode)
Fast TTFF < 1 s in Hot start and 30 s in Cold Start
High performance ARM946 MCU (up to 196 MHz)
External SQI Flash interface
256 Kbyte embedded SRAM
Real Time Clock (RTC) circuit
32-bit Watch-dog timer
2 UARTs
1 I2 C master/slave interface
USB2.0 full speed (12 MHz) with integrated physical layer transceiver
2 Controller Area Network (CAN)
2 channels ADC (10 bits)
Operating condition:
Main voltage regulator (VINL ): 1.8 V ± 5%
Backup voltage (VINB ): 1.6 V to 4.3 V
Digital voltage (VDD ): 1.1 V to 1.32 V
RF core voltage (VCC ): 1.2 V ± 10%
IO Ring Voltage (VddIO ): 1.8 V ± 5% or 3.3 V ± 10%