* 150 MHz e200z4 Power Architecture core * Variable length instruction encoding (VLE) * Superscalar architecture with 2 execution units * Up to 2 integer or floating point instructions per cycle * Up to 4 multiply and accumulate operations per cycle * Memory organization * 4 MB on-chip flash memory with ECC and Read While Write (RWW) * 192 KB on-chip RAM with standby functionality (32 KB) and ECC * 8 KB instruction cache (with line locking), configurable as 2- or 4-way * 14 + 3 KB eTPU code and data RAM * 5 × 4 crossbar switch (XBAR) * 24-entry MMU * External Bus Interface (EBI) with slave and master port * Fail Safe Protection * 16-entry Memory Protection Unit (MPU) * CRC unit with 3 sub-modules * Junction temperature sensor * Interrupts * Configurable interrupt controller (with NMI) * 64-channel DMA * Serial channels * 3 × eSCI * 3 × DSPI (2 of which support downstream Micro Second Channel [MSC]) * 3 × FlexCAN with 64 messages each * 1 × FlexRay module (V2.1) up to 10 Mbit/s with dual or single channel and 128 message objects and ECC * 1 × eMIOS * 24 unified channels * 1 × eTPU2 (second generation eTPU) * 32 standard channels * 1 × reaction module (6 channels with three outputs per channel) * 2 enhanced queued analog-to-digital converters (eQADCs) * Forty 12-bit input channels (multiplexed on 2 ADCs); expandable to 56 channels with external multiplexers * 6 command queues * Trigger and DMA support * 688 ns minimum conversion time * On-chip CAN/SCI/FlexRay Bootstrap loader with Boot Assist Module (BAM) * Nexus: Class 3+ for core; Class 1 for the eTPU * JTAG (5-pin) * Development Trigger Semaphore (DTS) * Clock generation * On-chip 4–40 MHz main oscillator * On-chip FMPLL (frequency-modulated phase-locked loop) * Up to 120 general purpose I/O lines * Individually programmable as input, output or special function * Programmable threshold (hysteresis) * Power reduction mode: slow, stop and stand-by modes * Flexible supply scheme * 5 V single supply with external ballast * Multiple external supply: 5 V, 3.3 V and 1.2 V * Designed for LQFP176, LBGA208, PBGA324 and Known Good Die (KGD)
