The LPC2129FBD64/01 is a 16/32-bit Microcontroller based on ARM7TDMI-S CPU with real-time emulation and embedded trace support. A 128-bit wide memory interface and an unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. The device incorporates 256kB internal flash, 16kB internal RAM, 4-channel 10-bit A/D converter, various 32-bit timers, PWM channels and 46 general-purpose I/O pins.
In-system programming (ISP) and In-application programming (IAP)
EmbeddedICE-RT interface enables breakpoints and watch points
Embedded trace macrocell enables non-intrusive high speed real-time tracing of instruction execution
Multiple serial interfaces including two UARTs (16C550), fast I2C-bus (400 Kbit/s) and two SPIs
60MHz Maximum CPU clock available from programmable on-chip phase-locked loop
Vectored interrupt controller with configurable priorities and vector addresses
Up to forty-six 5V tolerant general purpose I/O pins
On-chip crystal oscillator with an operating range of 1MHz to 30MHz
Two low power modes, Idle and power-down
Processor wake-up from power-down mode via external interrupt
Individual enable/disable of peripheral functions for power optimization
Fast GPIO ports enable port pin toggling up to 3.5 times faster than the original device
Dedicated result registers for ADC reduce interrupt overhead
The ADC pads are 5V tolerant when configured for digital I/O function
