The CC1021 device is a true single-chip UHF transceiver designed for very low power and very low voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 433 MHz, 868 MHz, and 915 MHz, but can easily be programmed for multichannel operation at other frequencies in the 402- to 470-MHz and 804- to 960-MHz range.
The CC1021 device is especially suited for narrowband systems with channel spacing of 50 kHz and higher complying with EN 300 220, FCC CFR47 part 15, and ARIB STD-T96.
The CC1021 main operating parameters can be programmed through a serial bus, thus making CC1021 a very flexible and easy to use transceiver.
In a typical system, CC1021 will be used together with a microcontroller and a few external passive components.
True Single Chip UHF RF Transceiver
Frequency Range 402 MHz to 470 MHz and 804 MHz to 960 MHz
High Sensitivity
Up to –112 dBm for 38.4 kHz Receiver Channel Filter Bandwidth
Up to –106 dBm for 102.4 kHz Receiver Channel Filter Bandwidth
Programmable Output Power
Low Current Consumption
RX: 19.9 mA
Low Supply Voltage
From 2.3 V to 3.6 V
Very Few External ComponentsRequired
Small Size
QFN 32 Package
Pb-Free Package
Digital RSSI and Carrier Sense Indicator
Data Rate Up to 153.6 kBaud
OOK, FSK, and GFSK Data Modulation
Integrated Bit Synchronizer
Image Rejection Mixer
Programmable Frequency
Automatic Frequency Control (AFC)
Suitable for Frequency Hopping Systems
Suited for Systems Targeting Compliance With
EN 300 220, FCC CFR47 Part 15, ARIB STD-T96
Development Kit Available
Easy-to-Use Software for Generating the CC1021 Configuration Data
Fully Compatible With CC1020 for Receiver Channel Filter Bandwidths of 38.4 kHz and Higher
