The TVP5150AM1PBS is an ultralow-power NTSC/PAL/SECAM Video Decoder. The TVP5150AM1 decoder converts NTSC, PAL and SECAM video signals to 8-bit ITU-R BT.656 format. Discrete syncs are also available. The optimized architecture of the TVP5150AM1 decoder allows for ultralow power consumption. The decoder uses just one crystal for all supported standards. The TVP5150AM1 decoder can be programmed using an I 2C serial interface. The TVP5150AM1 decoder converts baseband analog video into digital YCbCr 4:2:2 component video. Composite and S-video inputs are supported. The TVP5150AM1 decoder includes one 9-bit analog-to-digital converter (ADC) with 2x sampling. Sampling is ITU-R BT.601 (27.0MHz, generated from the 14.31818MHz crystal or oscillator input) and is line locked. The output formats can be 8-bit 4:2:2 or 8-bit ITU-R BT.656 with embedded synchronization.
Accepts NTSC (J, M, 4.43), PAL (B, D, G, H, I, M, N, Nc) and SECAM (B, D, G, K, K1, L) Video
Supports ITU-R BT.601 standard sampling
High-speed 9-bit ADC
Two composite inputs or one S-Video input
Fully differential CMOS analog preprocessing channels with clamping
Automatic gain control (AGC) for best signal-to-noise (S/N) performance
Ultralow power consumption
<1 mW Power-down mode
Brightness, contrast, saturation, hue and sharpness control through I²C
Complementary 4-line (3-H Delay) adaptive comb filters for both cross-luminance
Cross-chrominance noise reduction
Patented architecture for locking to weak, noisy or unstable signals
Internal phase-locked loop (PLL) for line-locked clock and sampling
Subcarrier genlock output for synchronizing colour subcarrier of external encoder
ITU-R BT.656, 8-Bit 4:2:2 with embedded syncs
8-bit 4:2:2 with discrete syncs
Macrovision™ copy protection detection
2x Oversampled raw vertical blanking interval (VBI) data during active video
Sliced VBI data during horizontal blanking or active video