The TS3DDR3812RUAR is a 1:2 Multiplexer/Demultiplexer switch designed for DDR3 applications. Channels A0 through A11 are divided into two banks of six bits and are independently controlled via two digital inputs called SEL1 and SEL2. These select inputs control the switch position of each 6-bit DDR3 source and allow them to be routed to one of two end-points. Alternatively, the switch can be used to connect a single endpoint to one of two 6-bit DDR3 sources. For switching 12-bit DDR3 sources, simply connect SEL1 and SEL2 together externally and control all 12 channels with a single GPIO input. An EN input allows the entire chip to be placed into a high-impedance (Hi-Z) state while not in use.
Compatible with DDR3 SDRAM standard (JESD79-3D)
Wide bandwidth of 1.675GHz
Low propagation delay
Low bit-to-bit skew
Low input/output capacitance
Low crosstalk
Rail-to-rail switching on data I/O ports (0 to VCC)
Separate switch control logic for upper and lower 6-channels
Dedicated enable logic supports Hi-Z mode
IOFF protection prevents current leakage in powered down state (VCC = 0V)
