This family of MCUs targets automotive powertrain controller applications for four-cylinder gasoline and diesel engines, chassis control applications, transmission control applications, steering and braking applications, as well as low-end hybrid applications.
Many of the applications are considered to be functionally safe and the family is designed to achieve ISO26262 ASIL-D compliance.
**Key Features**
Two main 32-bit Power Architecture® VLE compliant CPU core (e200z4), dual issue, running in lockstep
Single-precision floating point operations
16 KB local instruction SRAM and 64 KB local data SRAM
4 KB I-Cache and 2 KB D-Cache
One 32-bit Power Architecture® VLE compliant I/O processor core (e200z2)
Single-precision floating point operations
Lightweight Signal Processing Auxiliary Processing Unit (LSP APU) instruction support for digital signal processing (DSP)
16 KB local instruction SRAM and 48 KB local data SRAM
2624 KB on-chip flash memory
Supporting EEPROM emulation (64 KB)
64 KB on-chip general-purpose SRAM (+112 KB data RAM included in the CPUs)
Multi-channel direct memory access controller (eDMA) with 32 channels
Dual interrupt controller (INTC)
Dual phase-locked loops, including one Frequency-modulated
System integration unit lite (SIUL)
Boot Assist Flash (BAF) supports factory programming using a serial bootload through the asynchronous CAN or LIN/UART
Generic timer module (GTM122)
Intelligent complex timer module
88 channels (24 input and 64 output)
3 programmable fine grain multi-threaded cores
26 KB of dedicated SRAM
Hardware support for engine control, motor control and safety related applications
Enhanced analog-to-digital converter system with:
1 supervisor 12-bit SAR analog converter
4 separate fast 12-bit SAR analog converters
2 separate 16-bit Sigma-Delta analog converters
5 Deserial Serial Peripheral Interface (DSPI) modules
5 LIN and UART communication interface (LINFlexD) modules
3 MCAN interfaces with advanced shared memory scheme, two supporting ISO CAN-FD and one supporting TTCAN
One Ethernet controller 10/100 Mbps, compliant IEEE 802.3-2008
Dual-channel FlexRay controller
Nexus development interface (NDI) per IEEE-ISTO 5001-2003 standard, with partial support for 2010 standard
Device and board test support per Joint Test Action Group (JTAG) (IEEE 1149.1)
Single 5 V +/-10% Power supply supporting cold start conditions (down to 3.0 V)
