SN75LVDS051TIThe SN75LVDS179, SN75LVDS180, SN75LVDS050, and SN75LVDS051 are differential line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 155Mbps
￥
0
显示的图像仅供参考，应从产品数据表中获得准确的规格。
SN75LVDS051TI
制造商:
TI
制造商型号#:
SN75LVDS051
百芯编号#:
CM778970400
价格(CNY):
百芯库存:
233
个
库存地点:
可供应量:
135
个在库
此为供应商库存，需要与销售确认
产品描述:
The SN75LVDS179, SN75LVDS180, SN75LVDS050, and SN75LVDS051 are differential line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 155Mbps
The SN75LVDS179, SN75LVDS180, SN75LVDS050, and SN75LVDS051 are differential line drivers and receivers that use low-voltage differential signaling (LVDS) to achieve signaling rates as high as 155 Mbps. The TIA/EIA-644 standard compliant electrical interface provides a minimum differential output voltage magnitude of 247 mV into a 100 load and receipt of 100 mV signals with up to 1 V of ground potential difference between a transmitter and receiver.
The intended application of this device and signaling technique is for point-to-point baseband data transmission over controlled impedance media of approximately 100 characteristic impedance. The transmission media may be printed-circuit board traces, backplanes, or cables. (Note: The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling to the environment, and other application specific characteristics).
The SN75LVDS179, SN75LVDS180, SN75LVDS050, and SN75LVDS051 are characterized for operation from 0°C to 70°C.
Meets or Exceeds the Requirements of ANSI TIA/EIA-644-1995 Standard
Signaling Rates up to 155 Mbps
Operates From a Single 3.3-V Supply
Low-Voltage Differential Signaling With Typical Output Voltages of 350 mV and a 100 Load
LVTTL Input Levels are 5 V Tolerant
Driver is High Impedance When Disabled or With VCC < 1.5 V
