DEVICE OVERVIEW nThe PIC16F707/PIC16LF707 devices are covered by this data sheet. They are available in 40/44-pin packages. Figure 1-1 shows a block diagram of the PIC16F707/PIC16LF707 devices. Table 1-1 shows the pinout descriptions.nHigh-Performance RISC CPU: n• Only 35 Single-Word Instructions to Learn: n - All single-cycle instructions except branches n• Operating Speed: n - DC – 20 MHz clock input n - DC – 200 ns instruction cycle n• 8K x 14 Words of Flash Program Memory n• 363 Bytes of Data Memory (SRAM) n• Interrupt Capability n• 8-Level Deep Hardware Stack n• Direct, Indirect and Relative Addressing modes n• Processor Read Access to Program Memory n• Pinout Compatible to other 40-pin PIC16CXXX and PIC16FXXX MicrocontrollersnSpecial Microcontroller Features: n• Precision Internal Oscillator: n - 16 MHz or 500 kHz operation n - Factory calibrated to ±1%, typical n - Software selectable ÷1, ÷2, ÷4 or ÷8 divider n• 31 kHz Low-Power Internal Oscillator n• External Oscillator Block with: n - 3 crystal/resonator modes up to 20 MHz n - 3 external clock modes up to 20 MHz n• Power-on Reset (POR) n• Power-up Timer (PWRT) n• Oscillator Start-Up Timer (OST) n• Brown-out Reset (BOR): n - Selectable between two trip points n - Disabled in Sleep option n• Watchdog Timer (WDT) n• Programmable Code Protection n• In-Circuit Serial Programming™ (ICSP™) via two pins n• In-Circuit Debug (ICD) via Two Pins n• Multiplexed Master Clear with Pull-up/Input Pin n• Industrial and Extended Temperature Range n• High-Endurance Flash Cell: n - 1,000 Write Flash Endurance (typical) n - Flash Retention: >40 years n - Power-Saving Sleep mode n• Operating Voltage Range: n - 1.8V to 3.6V (PIC16LF707) n• 1.8V to 5.5V (PIC16F707)nExtreme Low-Power Management PIC16LF707 with nanoWatt XLP: n• Sleep mode: 20 nA @ 1.8V, typical n• Watchdog Timer: 500 nA @ 1.8V, typical n• Timer1 Oscillator: 600 nA @ 1.8V, typical @ 32 kHznmTouch™ Technology Features: n• Up to 32 Channels n• Two Capacitive Sensing modules: n - Acquire 2 samples simultaneously n• Multiple Power modes: n - Operation during Sleep n - Proximity sensing with ultra low µA current n• Adjustable Waveform Min. and Max. for Optimal Noise Performance n• 1.8V to 5.5V Operation (3.6V max. for PIC16LF707)nAnalog Features: n• A/D Converter: n - 8-bit resolution and up to 14 channels n - Conversion available during Sleep n - Selectable 1.024V/2.048V/4.096V voltage reference n• On-chip 3.2V Regulator (PIC16F707 device only)nPeripheral Highlights: n• Up to 35 I/O Pins and 1 Input-only Pin: n - High current source/sink for direct LED drive n - Interrupt-on-pin change n - Individually programmable weak pull-ups n• Timer0/A/B: 8-Bit Timer/Counter with 8-Bit Prescaler n• Enhanced Timer1/3: n - Dedicated low-power 32 kHz oscillator driver n - 16-bit timer/counter with prescaler n - External Gate Input mode with toggle and single shot modes n - Interrupt-on-gate completion n• Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler n• Two Capture, Compare, PWM modules (CCP): n - 16-bit Capture, max. resolution 12.5 ns n - 16-bit Compare, max. resolution 200 ns n - 10-bit PWM, max. frequency 20 kHz n• Addressable Universal Synchronous n Asynchronous Receiver Transmitter (AUSART)
