The PCM3060 is a low-cost, high-performance, single-chip, 24-bit stereo audio codec with single-ended analog inputs and differential analog outputs.
The stereo 24-bit ADC employs a 64-times delta-sigma modulator. It supports 16-96 kHz sampling rates and a 16/24-bit digital audio output word on the audio interface.
The stereo 24-bit DAC employs a 64- or 128-times delta-sigma modulator. It supports 16-192 kHz sampling rates and a 16/24-bit digital audio input word on the audio interface.
The PCM3060 supports fully independent operation of the sampling rate and audio interface for the ADC and DAC.
Each audio interface supports I2S, left-justified, and right-justified formats with 16/24-bit words.
The PCM3060 can be software-controlled through a 3-wire SPI-compatible or 2-wire I2C-compatible serial interface, which provides access to all functions including digital attenuation, soft mute, de-emphasis etc.
The PCM3060 can be also used in hardware mode, which provides three basic functions.
The PCM3060 is fabricated using a highly advanced CMOS process and is available in a small 28-pin TSSOP package.
The PCM3060 is suitable for various sound processing applications for DVD-RW, digital TV, STB, and other AV equipment.
24-Bit Delta-Sigma ADC and DAC
ADC, DAC Asynchronous Operation
Stereo ADC:
High Performance: (Typical, 48 kHz)
THD+N: -93 dB
SNR: 99 dB
Dynamic Range: 99 dB
Sampling Rate: 16-96 kHz
System Clock: 256, 384, 512, 768 fS
Full Scale Input: 3 Vp-p
Antialiasing Filter Included
1/64 Decimation Filter:
Pass-Band Ripple: ±0.05 dB
Stop-Band Attenuation: -65 dB
On-Chip High-Pass Filter: 0.91 Hz at fS = 48 kHz
Stereo DAC:
High Performance: (Typical, Differential, 48 kHz)
THD+N: -94 dB
SNR: 105 dB
Dynamic Range: 104 dB
Sampling Rate: 16-192 kHz
System Clock: 128, 192, 256, 384, 512, 768 fS
Differential Voltage Output: 8 Vp-p
Single-Ended Voltage Output: 4 Vp-p
Analog Low-Pass Filter Included
4×/8× Oversampling Digital Filter:
Pass-Band Ripple: ±0.04 dB
Stop-Band Attenuation: -50 dB
Zero Flags
Flexible Mode Control
3-Wire SPI, 2-Wire I2C Compatible Serial Control Interface
Hardware Control Mode
Multiple Functions via SPI or I2C Interface:
Digital Attenuation and Soft Mute for ADC and DAC
Digital De-Emphasis: 32, 44.1, 48 kHz for DAC
Power Down: ADC/DAC Independently
Asynchronous/Synchronous Control for ADC/DAC Operation
