The QorIQ® P1010 and P1014 communications processors expand QorIQ performance into cost- and power-sensitive applications. Based on 45 nm technology, the processors provide performance up to 1000 MHz and power dissipation as low as 1.1 watts, along with extensive integration and a rich set of interfaces that target cost-sensitive endpoint applications such as:
* IP Camera
* Industrial Robot
* Wireless LAN (WLAN) Access Point
* Network Attached Storage
* Printing and Imaging
* Router
MoreLess
## Features
### CORE COMPLEX
* Single e500 core, built on Power Architecture® technology
* 32 KB of L1 instruction cache and 32 KB of L1 data cache
* 400 to 1000 MHz core clock frequency
* 256 KB L2 cache with ECC, also configurable as SRAM and stashing memory
### NETWORKING ELEMENTS
* SerDes
* 6 lanes at up to 3.125 GHz
* Supports SGMII, PCI Express® (PCIe) and SATA
### ACCELERATORS AND MEMORY CONTROL
* 16-/32-bit DDR3 SDRAM memory controller with ECC support
* Hardware based cryptography acceleration (SEC4.0)
* Up to three gigabit Ethernet interfaces with support for IEEE® 1588
* TCP/IP acceleration, quality of service and classification capabilities
* Support for RGMII and SGMII
### BASIC PERIPHERALS AND INTERCONNECT
* 1 x USB controller (USB 2.0) with integrated PHY, OTG and device support
* 2x Serial ATA (SATA2.0) controllers
* Serial peripheral interface (SPI)
* Trusted boot platform, integrated security
* Four-channel DMA controller
* 2 x I²C controllers, 2 x DUARTs, timers
* Integrated flash controller (IFC) with enhanced capabilities to support large pages
* 2x PCIe controllers
* 2x FlexCAN interfaces to support industrial protocols
### ADDITIONAL FEATURES
* Trusted boot platformComparison Table
| P1010 | P1014
\---|---|---
**Core Frequency** | 533 to 1000 MHz | 400 to 800 MHz
