The NPH10S2405EIC is an isolated single-output DC/DC Converter combines ease of application with versatility. The pin pattern is based on the popular industry standard, but two additional pins may optionally be fitted to provide a variety of features not commonly found on units of this type. High efficiency enables full rating to be achieved in a small package without heat-sinking. It is thermally protected against sustained overload. The copper case achieves efficient heat transfer and screening. It has been recognized by Underwriters Laboratory (UL) to UL 1950 for operational insulation.
Industry standard pin-out
Non latching current limit
Operation to zero load
Protected against load faults
Internal over temperature protection
Uses no electrolytic capacitors
Fixed frequency
No external components required
Up to 1.5Wcm³ power density
12W Surge rating
1.5kV Input to output isolation
Continuous rating to 10W at 72°C without heat-sink
