MCP25050MicrochipMixed-Signal Input/Output Expander. Contains up to 8 digital I/O, up to 4 10Bit A/D converters and up to 2 PWM outputs configurable by user.:
￥
0
显示的图像仅供参考，应从产品数据表中获得准确的规格。
MCP25050Microchip
制造商:
Microchip
制造商型号#:
MCP25050
百芯编号#:
CM480840470
价格(CNY):
百芯库存:
204
个
库存地点:
可供应量:
142
个在库
此为供应商库存，需要与销售确认
产品描述:
Mixed-Signal Input/Output Expander. Contains up to 8 digital I/O, up to 4 10Bit A/D converters and up to 2 PWM outputs configurable by user.:
The MCP2502X/5X devices operate as I/O expanders for a Controller Area Network (CAN) system, supporting CAN V2.0B active, with bus rates up to 1 Mb/s. The MCP2502X/5X allows a simple CAN node to be implemented without the need for a microcontroller.
Features
• Implements CAN V2.0B
\- Programmable bit rate up to 1 Mb/s
\- One programmable mask
\- Two programmable filters
\- Three auto-transmit buffers
\- Two message reception buffers
\- Does not require synchronization or configuration messages
• Hardware Features
\- Non-volatile memory for user configuration
\- User configuration automatically loaded on power-up
\- Eight general-purpose I/O lines individually selectable as inputs or outputs
\- Individually selectable transmit-on-pin change for each input
\- Four 10-bit, analog input channels with programmable conversion clock and VREF sources (MCP2505X devices only)
\- Message scheduling capability
\- Two 10-bit PWM outputs with independently programmable frequencies
\- Device configuration can be modified via CAN bus messages
\- In-Circuit Serial Programming™ (ICSP™) of default configuration memory
\- Optional 1-wire CAN bus operation
• Low-power CMOS technology
\- Operates from 2.7V to 5.5V
\- 10 mA active current, typical
\- 30 µA standby current (CAN Sleep mode)
• 14-pin PDIP (300 mil) and SOIC (150 mil) packages
