The MCIMX283DVM4B is a low-power high-performance Application Processor optimized for the general embedded industrial and consumer markets. The core of the i.MX28 is Freescale"s fast, power-efficient implementation of the ARM926EJ-S™ core, with speeds of up to 454MHz. The integrated power management unit (PMU) on the i.MX28 is composed of a triple output DC-DC switching converter and multiple linear regulators. These provide power sequencing for the device and its I/O peripherals such as memories and SD cards, as well as provide battery charging capability for Li-Ion batteries. The i.MX28 processor includes an additional 128kB on-chip SRAM to make the device ideal for eliminating external RAM in applications with small footprint RTOS. The i.MX28 supports connections to various types of external memories, such as mobile DDR, DDR2 and LV-DDR2, SLC and MLC NAND Flash.
ARM926EJ-S CPU running at 454MHz
ARM embedded trace macrocell (CoreSight™ ETM9™)
Parallel JTAG interface
128kB Integrated low-power on-chip SRAM
1280 bits of on-chip one-time-programmable (OCOTP) ROM
Support for up to eight NAND Flash memory devices with up to 20-bit BCH ECC
10/100Mbps Ethernet MAC compatible with IEEE STD 802.3™
Two 2.0B protocol-compatible Controller Area Network (CAN) interfaces
One USB2.0 OTG device/host controller and PHY
One USB2.0 host controller and PHY
LCD controller, up to 24-bit RGB (DOTCK) modes and 24-bit system-mode
SPDIF transmitter
One debug UART operating at up to 115 Kb/s using programmed I/O
Two I²C master/slave interfaces, up to 400kbps
Four 32-bit timers and a rotary decoder
Eight pulse width modulators (PWMs)
Real-time clock (RTC)
GPIO with interrupt capability
ESD sensitive device, take proper precaution while handling the device.
