MAX507BCWG+Maxim IntegratedMAXIM INTEGRATED PRODUCTS MAX507BCWG+ Digital to Analog Converter, Precision, 12Bit, Bipolar, Unipolar, ± 11.4V to ± 15.75V, WSOIC
￥
97.16
显示的图像仅供参考，应从产品数据表中获得准确的规格。
MAX507BCWG+Maxim Integrated
制造商:
Maxim Integrated
制造商型号#:
MAX507BCWG+
百芯编号#:
CM63428536
价格(CNY):
￥
97.16
百芯库存:
261
个
库存地点:
可供应量:
200
个在库
此为供应商库存，需要与销售确认
产品类别:
DA转换器,数模
产品描述:
MAXIM INTEGRATED PRODUCTS MAX507BCWG+ Digital to Analog Converter, Precision, 12Bit, Bipolar, Unipolar, ± 11.4V to ± 15.75V, WSOIC
The MAX507BCWG+ is a voltage output, 12bit digital to analogue converter (DAC) with internal reference in 24 pin WSOIC package. This DAC"s output voltage has same polarity as reference, the basic circuit consists of a laser trimmed, thin-film, R-2R resistor array with NMOS switches. The double buffered logic inputs interface easily to µPs, data is transferred into input register either from a 12bit wide data bus or 16bit µPs. All logic signals are level triggered, TTL & CMOS compatible. Interface timing specifications insure compatibility with all common µPs. DAC is specified & tested for both dual & single supply operation. Usable supplies range from single +12V to dual ±15V. On-board gain-setting resistors allow three output-voltage ranges, 0V to +5V and 0V to +10V can be generated when using either single or dual supplies. With dual supplies, ±5V is also available. This is used in arbitrary function waveform generators, automated calibration, digital offset and gain adju
Supply voltage range is ±11.4V to ±15.75V
Operating temperature range from 0°C to 70°C
Internal buried zener reference
Parallel data interface
Voltage output slew rate is 2V/µs at single supply VDD = +11.4V to +15.75V
Short circuit current is 40mA at single supply VDD = +11.4V to +15.75V
Maximum reference output is 5.01V at TA= 25°C (VDD= 12V or +15V)
