MAX1703Maxim Integrated1-Cell to 3-Cell, High Power (1.5A), Low-Noise, Step-Up DC-DC ConverterCompact, High-Efficiency, Low-Noise Step-Up Converter with a Gain-Block
￥
0
显示的图像仅供参考，应从产品数据表中获得准确的规格。
MAX1703Maxim Integrated
制造商:
Maxim Integrated
制造商型号#:
MAX1703
百芯编号#:
CM986559670
价格(CNY):
百芯库存:
204
个
库存地点:
可供应量:
146
个在库
此为供应商库存，需要与销售确认
产品描述:
1-Cell to 3-Cell, High Power (1.5A), Low-Noise, Step-Up DC-DC ConverterCompact, High-Efficiency, Low-Noise Step-Up Converter with a Gain-Block
The MAX1703 is a high-efficiency, low-noise, step-up DC-DC converter intended for use in battery-powered wireless applications. It uses a synchronous-rectified pulse-width-modulation (PWM) boost topology to generate a 2.5V to 5.5V output from battery inputs, such as one to three NiCd/NiMH cells or one Li-Ion cell. The device includes a 2A, 75mΩ, N-channel MOSFET switch and a 140mΩ, P-channel synchronous rectifier.
With its internal synchronous rectifier, the MAX1703 delivers up to 5% better efficiency than similar nonsynchronous converters. It also features a pulse-frequency-modulation (PFM) low-power mode to improve efficiency at light loads, and a 1µA shutdown mode.
The MAX1703 comes in a 16-pin narrow SO package and includes an uncommitted comparator that generates a power-good or low-battery-warning output. It also contains a linear gain block that can be used to build a linear regulator.
For lower-power outputs and a smaller package, refer to the MAX1700/MAX1701. For dual outputs (step-up plus linear regulator), refer to the MAX1705/MAX1706. For an on-board analog-to-digital converter, refer to the MAX848/MAX849.
The MAX1703 evaluation kit is available to speed designs.
