The ISL6534 is a versatile triple regulator that has two independent synchronous-rectified buck controllers with integrated 12V gate drivers (OUT1 and OUT2) and a linear controller (OUT3) to offer precision regulation of up to three voltage rails. An optional shunt regulator allows 12V only operation, when a 5V supply is not available.
Features
• Two Synchronous-Rectified Buck Controllers
- Voltage Mode control
- VIN range up to 12V
- VOUT range from 0.6V to 6V
- 12V LGATE drivers; up to 12V Boot Strap for UGATE
• Switcher References
- 0.6V Reference for OUT1 (0.8% Accurate)
- 3.3V Reference Output for OUT2 (0.8% Accurate)
- External Reference Input for OUT2
- Buffered VTT Reference Output
• Switcher clocking
- Phase options for Optimal Clock Relationship
- Resistor-Selectable Switching Frequency (300kHz default; Resistor to Ground for 300kHz to 1MHz range)
- Synchronization-Capable Switching Frequency (Connect FS_SYNC to Separate Regulator)
• Single Linear Controller
- Drives N-Channel MOSFET
- 0.6V Reference (0.8% Accurate)
- VIN range up to 12V
- VOUT range from 0.6V to 6V
• 12V and 5V supplies required (but optional shunt regulator can generate VCC = 5.8V from 12V)
• Three Independent Soft-Start/Enable Pins
- Gang Together or Control Independently
• PGOOD Output Indicates All Outputs Available
• Thermally Enhanced QFN or TSSOP Package
• QFN Package:
- Compliant to JEDEC PUB95 MO-220 QFN
- Quad Flat No Leads - Package Outline
- Near Chip Scale Package footprint, which improves PCB efficiency and has a thinner profile
