FXLH1T45L6XON SemiconductorLow Voltage 1Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs (Advance Information)
￥
3.66
显示的图像仅供参考，应从产品数据表中获得准确的规格。
FXLH1T45L6XON Semiconductor
制造商:
ON Semiconductor
制造商型号#:
FXLH1T45L6X
百芯编号#:
CM55060929
价格(CNY):
￥
3.66
百芯库存:
2,498
个
库存地点:
可供应量:
1,632
个在库
此为供应商库存，需要与销售确认
产品类别:
电压电平,转换器
产品描述:
Low Voltage 1Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs (Advance Information)
The FXLH1T45 is a single bit configurable dual-voltage supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the V level, and the B port tracks the V level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in 3-STATE until both V reach active levels allowing either V to be powered-up first. Internal power down control circuits place the device in 3-STATE if either V is removed. The Transmit/Receive (T/R) input determines the direction of data flow through the device. The FXLH1T45 is designed so that the control pin (T/R) is supplied by V
Features
---
|
Bi-directional interface between any 2 levels from 1.1V to 3.6V
Fully configurable: Inputs track VCC level
Non-preferential power-up sequencing; either VCC may be powered-up first
Outputs remain in 3-STATE until active VCC level is reached
Outputs switch to 3-STATE if either VCC is at GND
Power off protection
Bushold on data inputs eliminates the need for external pull-up/pull-down resistors
Control input (T/R) levels are referenced to VCCA voltage
