The FLUKE 80I-110S is an AC/DC Current Probe designed to provide with safe, high accuracy measurements for a wide range of applications. The specially designed built-in safety features such as the 600Vrms rating at the input jaws, output cable and BNC connector enhance work safety in power distribution systems. It is shielded for high noise immunity, to prevent unwanted noise when troubleshooting around noise generating devices. It accurately reproduces current waveforms as they occur. Connect the clamp to a Fluke ScopeMeter® test tool or other waveform recording device like a Fluke power harmonics analyser, to clearly see distorted waveforms that result from non-linear loads. Current clamps, not specifically designed for oscilloscopes, may add distortion to the actual signal present in the system under test. The wide measurement range from 50mA to 100A with a high fidelity millivolt output gives full advantage of the high resolution oscilloscope displays.
