The FAN3121 and FAN3122 MOSFET drivers are designed to drive N-channel enhancement MOSFETs in low-side switching applications by providing high peak current pulses. The drivers are available with either TTL (FAN312xT) or CMOS (FAN312xC) input thresholds. Internal circuitry provides an under-voltage lockout function by holding the output low until the supply voltage is within the operating range. FAN312x drivers incorporate the MillerDrive™ architecture for the final output stage. This bipolar / MOSFET combination provides the highest peak current during the Miller plateau stage of the MOSFET turn-on / turn-off process. The FAN3121 and FAN3122 drivers implement an enable function on pin 3 (EN), previously unused in the industry-standard pin-out. The pin is internally pulled up to V for active HIGH logic and can be left open for standard operation. The FAN3121/22 is available in a 3x3mm 8-lead thermally-enhanced MLP package or an 8-lead SOIC package.
Features
---
|
Industry-Standard Pin-out with Enable Input
4.5 to 18V Operating Range
11.4A Peak Sink at VDD = 12V
9.7A Sink / 7.1A Source at VOUT = 6V
Inverting Configuration (FAN3121) and Non-Inverting Configuration (FAN3122)
Internal Resistors Turn Driver Off If No Inputs
23ns/19ns Typical Rise/Fall Times with 10nF Load
20ns Typical Propagation Delay Time
Choice of TTL or CMOS Input Thresholds
MillerDrive™ Technology
Available in Thermally Enhanced 3x3mm 8-Lead MLP or 8-Lead SOIC Package (Pb-Free Finish)
