The DRV8303 is a gate driver IC for three-phase motor-drive applications. The device provides three half bridge drivers, each capable of driving two N-channel MOSFETs. The device supports up to 1.7-A source and 2.3-A peak current capability. The DRV8303 can operate off of a single power supply with a wide range from 6-V to 60-V. It uses a bootstrap gate-driver architecture with trickle charge circuitry to support 100% duty cycle. The DRV8303 uses automatic hand shaking when the high-side or low-side MOSFET is switching to prevent current shoot through. Integrated VDS sensing of the high-side and low-side MOSFETs is used to protect the external power stage against overcurrent conditions.
The DRV8303 includes two current-shunt amplifiers for accurate current measurement. The amplifiers support bi-directional current sensing and provide and adjustable output offset up to 3 V.
The serial peripheral interface (SPI) provides detailed fault reporting and flexible parameter settings such as gain options for the current-shunt amplifiers and slew-rate control of the gate drivers.
For all available packages, see the orderable addendum at the end of the data sheet.
6-V to 60-V Operating Supply Voltage Range
1.7-A Source and 2.3-A Sink Gate Drive Current Capability
Slew Rate Control for EMI Reduction
Bootstrap Gate Driver With 100% Duty Cycle Support
6 or 3 PWM Input Modes
Dual Integrated Current-Shunt Amplifiers With Adjustable Gain and Offset
3.3-V and 5-V Interface Support
Serial Peripheral Interface (SPI)
Protection Features:
Programmable Dead Time Control (DTC)
Programmable Overcurrent Protection (OCP)
PVDD and GVDD Undervoltage Lockout (UVLO)
GVDD Overvoltage Lockout (OVLO)
Overtemperature Warning/Shutdown (OTW/OTS)
Reported through nFAULT, nOCTW, and SPI Registers
All trademarks are the property of their respective owners.
