sales@aipcba.com
CN
电子元器件采购 > ATMEL >

ATMEGA32U2 库存 & 价格

ATMEL 8Bit Microcontroller with 8/16/32K Bytes of ISP Flash and USB Controller
0
显示的图像仅供参考,应从产品数据表中获得准确的规格。
ATMEGA32U2 ATMEL
ATMEL
  • 制造商:
    ATMEL
  • 制造商型号#:
    ATMEGA32U2
  • 百芯编号#:
    CM1896201828
  • 价格(CNY):
  • 百芯库存:
    263
  • 库存地点: 香港
  • 可供应量:
    185 个在库
    此为供应商库存,需要与销售确认
  • 产品描述:
    8Bit Microcontroller with 8/16/32K Bytes of ISP Flash and USB Controller
  • 文档: 3D模型
ATMEGA32U2 购买 ATMEGA32U2 库存和价格更新于 2025-06-14 03:50:22
  • 刷新
    器件型号: ATMEGA32U2
    百芯编号: CM1896201828
    制造商: ATMEL
    价格
    总计: 448
    MOQ: 1
    库存地点: 香港
    发货日期: 2025/06/19 (预期 )
  • 购买
    *由于库存数量、价格不断波动,请 联系我们 获取型号最新价格和库存。

    元器件库存查询

    库存查询
    百芯库存涵盖100,000个元器件
    欺诈预防提醒
    近日,我们发现不法分子冒充百芯智造进行诈骗或试图低价销售假冒和故障元器件。
    百芯智造在2021年建立了一个 元器件检测实验室 ,旨在提供有质量保证的组件。
    我们强烈建议客户选择可靠的元器件供应商。
    请注意,唯一电子邮件后缀是 aipcba.com
    ATMEGA32U2 数据规格书
    ATMEGA32U2 数据手册Datasheet
    28 Pages, 188 KB
    2005/10/24
    查看
    产品概述
    • Overview
    • The ATmega8U2/16U2/32U2 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega8U2/16U2/32U2 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
    • Features
    • • High Performance, Low Power AVR® 8-Bit Microcontroller
    • • Advanced RISC Architecture
    • – 125 Powerful Instructions – Most Single Clock Cycle Execution
    • – 32 x 8 General Purpose Working Registers
    • – Fully Static Operation
    • – Up to 16 MIPS Throughput at 16 MHz
    • • Non-volatile Program and Data Memories
    • – 8K/16K/32K Bytes of In-System Self-Programmable Flash
    • – 512/512/1024 EEPROM
    • – 512/512/1024 Internal SRAM
    • – Write/Erase Cycles: 10,000 Flash/ 100,000 EEPROM
    • – Data retention: 20 years at 85C/ 100 years at 25OC(1)
    • – Optional Boot Code Section with Independent Lock Bits
    • In-System Programming by on-chip Boot Program hardware-activated after reset
    • True Read-While-Write Operation
    • – Programming Lock for Software Security
    • • USB 2.0 Full-speed Device Module with Interrupt on Transfer Completion
    • – Complies fully with Universal Serial Bus Specification REV 2.0
    • – 48 MHz PLL for Full-speed Bus Operation : data transfer rates at 12 Mbit/s
    • – Fully independant 176 bytes USB DPRAM for endpoint memory allocation
    • – Endpoint 0 for Control Transfers: from 8 up to 64-bytes
    • – 4 Programmable Endpoints:
    • IN or Out Directions
    • Bulk, Interrupt and IsochronousTransfers
    • Programmable maximum packet size from 8 to 64 bytes
    • Programmable single or double buffer
    • – Suspend/Resume Interrupts
    • – Microcontroller reset on USB Bus Reset without detach
    • – USB Bus Disconnection on Microcontroller Request
    • • Peripheral Features
    • – One 8-bit Timer/Counters with Separate Prescaler and Compare Mode (two 8-bit PWM channels)
    • – One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture Mode (three 8-bit PWM channels)
    • – USART with SPI master only mode and hardware flow control (RTS/CTS)
    • – Master/Slave SPI Serial Interface
    • – Programmable Watchdog Timer with Separate On-chip Oscillator
    • – On-chip Analog Comparator
    • – Interrupt and Wake-up on Pin Change
    • • On Chip Debug Interface (debugWIRE)
    • • Special Microcontroller Features
    • – Power-On Reset and Programmable Brown-out Detection
    • – Internal Calibrated Oscillator
    • – External and Internal Interrupt Sources
    • – Five Sleep Modes: Idle, Power-save, Power-down, Standby, and Extended Standby
    • • I/O and Packages
    • – 22 Programmable I/O Lines
    • – QFN32 (5x5mm) / TQFP32 packages
    • • Operating Voltages
    • – 2.7 - 5.5V
    • • Operating temperature
    • – Industrial (-40°C to +85°C)
    • • Maximum Frequency
    • – 8 MHz at 2.7V - Industrial range
    • – 16 MHz at 4.5V - Industrial range
    • Note: 1. See “Data Retention” on page 6for details.

    百芯智造认证

    百芯智造承诺产品质量和安全通过ISO 9001、ISO 13485、ISO 45001、UL、RoHS、CQC 和 REACH 认证
    查看我们的认证 >
    订购详情及相关信息
    •  此处条款仅供参考,实际条款以销售报价为准。
      - 订购时请确认产品规格。
      - MOQ 是指购买每个零件所需的最小起订量。
      - 如果您有特殊的订购说明,请在订购页面注明。
      - 装运前会进行检验 (PSI)。
      - 您可以随时给我们发邮件查询订单状态。
      - 包裹发货后无法取消订单。
    • - 提前电汇(银行转账),也可选择PayPal。
      - 仅限现金转账。(不接受支票和账单转账。)
      - 客户负责支付所有可能的费用,包括销售税、增值税和海关费用等。
      - 如果您需要详细的发票或税号,请给我们发送电子邮件。
    • - 可选择顺丰或跑腿。
      - 您可以选择是通过您的运费帐户收取运费还是由我们收取。
      - 偏远地区请提前与物流公司确认。
      (在这些地区送货可能会收取额外费用(35-50 美元)。)
      - 交货日期:通常为 2 到 7 个工作日。
      - 您的订单发货后将发送跟踪号。
    • - 由百芯智造仓库仔细检查和包装
      - 真空包装
      - 防静电包装
      - 防震泡沫
    • - 收入质量控制 (IQC),800多家合格经销商。
      - 500m² 高级元器件检测实验室、假冒检测、RoHS 合规性等
      - 2000㎡数码元器件仓库,恒温恒湿
      - 开盖检查
      - X-Ray检查
      - XRF检查
      - 电气测试
      - 外观检测
    • - 不合格和假冒检测
      - 故障分析
      - 电气测试
      - 生命周期和可靠性测试
      -百芯2021年成立元器件检测实验室
      了解更多 >

    电子元件供应服务

    立即查看
    SN:H0.15865LO0V17Q0QC0S2
    在线联系我们
    黄经理 - 百芯智造销售经理在线,5 分钟前
    您的邮箱 *
    消息 *
    发送