The ADZS-CM403F-EZLITE is a EZ-KIT Lite evaluation kit for ADSP-CM403F mixed signal control processor. This hardware evaluation board supports for the ADSP-CM40x signal control processor family. The ADSP-CM403F mixed signal control processor is based on the ARM Cortex-M4 processor core with floating point unit and integrated SRAM memory, flash memory, accelerators and peripherals. Two expansion connectors (analogue interface and PWM/digital interface) are provided for connecting boards that incorporate motors. Another expansion connector is provided for connecting an any bus board and/or a memory/FPGA extender card. The evaluation board is designed to be used in conjunction with the IAR embedded workbench development tools to test capabilities of the ADSP-CM403F processor.
Six LEDs, one power (green), one reset (red), one SYS_FAULT (red), and three general purpose (amber)
ADM708 microprocessor supervisory circuits
0.05ohm resistors for processor current measurement
ESD sensitive device, take proper precaution while handling the device.
The board is an open system design which does not include a shielded enclosure and therefore may cause interference to other electrical devices in close proximity.
