The ADS1015IDGST is a Precision Analogue-to-digital Converter (ADC) with 12 bits of resolution. Designed with precision, power and ease of implementation in mind. It features an onboard reference and oscillator. Data are transferred via an I²C-compatible serial interface, four I²C slave addresses can be selected. It operates from a single power supply ranging from 2.0 to 5.5V. It can perform conversions at rates up to 3300 samples per second (SPS). An onboard PGA is available, that offers input ranges from the supply to as low as ±256mV, allowing both large and small signals to be measured with high resolution. Also features an input multiplexer (MUX) that provides two differential or four single-ended inputs. It operates either in continuous conversion mode or a single-shot mode that automatically powers down after a conversion and greatly reduces current consumption during idle periods.
Low current consumption
128SPS to 3.3kSPS Programmable data rate
Internal low-drift voltage reference
Internal oscillator
Internal PGA
I²C Interface, pin-selectable addresses
Four single-ended or two differential inputs
Programmable comparator
IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
