下载
DS191 (v1.17) November 24, 2015 www.xilinx.com
Product Specification 1
© Copyright 2012–2015 Xilinx, Inc. Xilinx, the Xilinx logo, Zynq, Virtex, Artix, Kintex, Spartan, ISE, Vivado and other designated brands included herein are trademarks of Xilinx
in the United States and other countries. AMBA, AMBA Designer, ARM, Cortex-A9, CoreSight, Cortex, PrimeCell, ARM Powered, and ARM Connected Partner are trademarks
of ARM Ltd. All other trademarks are the property of their respective owners.
Introduction
The Zynq®-7000 All Programmable SoCs are available in
-3, -2, -2LI, -1, and -1LQ speed grades, with -3 having the
highest performance. The -2LI devices operate at
programmable logic (PL) V
CCINT
/V
CCBRAM
= 0.95V and are
screened for lower maximum static power. The speed
specification of a -2LI device is the same as that of a
-2 device. The -1LQ devices operate at the same voltage
and speed as the -1Q devices and are screened for lower
power. Zynq-7000 device DC and AC characteristics are
specified in commercial, extended, industrial, and
expanded (Q-temp) temperature ranges. Except the
operating temperature range or unless otherwise noted, all
the DC and AC electrical parameters are the same for a
particular speed grade (that is, the timing characteristics of
a -1 speed grade industrial device are the same as for a -1
speed grade commercial device). However, only selected
speed grades and/or devices are available in the
commercial, extended, or industrial temperature ranges.
All supply voltage and junction temperature specifications
are representative of worst-case conditions. The
parameters included are common to popular designs and
typical applications.
The available device/package combinations are outlined in:
• Zynq-7000 All Programmable SoC Overview (DS190
)
• Defense-grade Zynq-7000Q All Programmable SoC
Overview (DS196
)
• XA Zynq-7000 All Programmable SoC Overview
(DS188
)
This Zynq-7000 AP SoC data sheet, which covers the
specifications for the XC7Z030, XA7Z030, XQ7Z030,
XC7Z035, XC7Z045, XQ7Z045, XC7Z100, and XQ7Z100
complements the Zynq-7000 AP SoC documentation suite
available on the Xilinx website at www.xilinx.com/zynq
.
DC Characteristics
Zynq-7000 All Programmable SoC
(Z-7030, Z-7035, Z-7045, and Z-7100):
DC and AC Switching Characteristics
DS191 (v1.17) November 24, 2015 Product Specification
Table 1: Absolute Maximum Ratings
(1)
Symbol Description Min Max Units
Processing System (PS)
V
CCPINT
PS internal logic supply voltage –0.5 1.1 V
V
CCPAUX
PS auxiliary supply voltage –0.5 2.0 V
V
CCPLL
PS PLL supply –0.5 2.0 V
V
CCO_DDR
PS DDR I/O supply –0.5 2.0 V
V
CCO_MIO
(2)
PS MIO I/O supply –0.5 3.6 V
V
PREF
PS input reference voltage –0.5 2.0 V
V
PIN
(2)(3)(4)(5)
PS MIO I/O input voltage –0.40 V
CCO_MIO
+0.55 V
PS DDR I/O input voltage –0.55 V
CCO_DDR
+0.55 V
Programmable Logic (PL)
V
CCINT
PL internal supply voltage
–0.5 1.1 V
V
CCBRAM
PL supply voltage for the block RAM memories
–0.5 1.1 V
V
CCAUX
PL auxiliary supply voltage
–0.5 2.0 V
V
CCO
PL output drivers supply voltage for HR I/O banks
–0.5 3.6 V
PL output drivers supply voltage for HP I/O banks
–0.5 2.0 V
V
CCAUX_IO
(4)
Auxiliary supply voltage
–0.5 2.06 V
Send Feedback
