The TPA2001D1PW is a 1W mono bridge-tied-load (BTL) Class D Amplifier designed to drive a speaker with at least 8R impedance. The amplifier uses TI"s third generation modulation technique, which results in improved efficiency and SNR. It also allows the device to be connected directly to the speaker without the use of the LC output filter commonly associated with class-D amplifier (this results in EMI which must be shielded at the system level). These features make the device ideal for use in devices where high-efficiency is needed to extend battery run time. The gain of the amplifier is controlled by two input terminals, GAIN1 and GAIN0. The differential input terminals are high-impedance CMOS inputs and can be used as summing nodes. The class-D BTL amplifier includes depop circuitry to reduce the amount of turn-on pop at power up and when cycling shutdown.
Modulation scheme optimized to operate without a filter
Extremely efficient third generation 5V class-D technology
Integrated depop circuitry
Short-circuit protection (short to battery, ground and load)
