The TLE4206-2G is a protected H-Bridge Driver designed specifically for automotive headlight beam control and industrial servo control applications. The part is built using Infineons bipolar high voltage power technology DOPL.The standard enhanced power PG-DSO-14-22 package meets the application requirements and saves PCB-board space and costs. Moreover the package is RoHS compliant. The servo-loop-parameter pos.- and neg. Hysteresis, pos.- and neg. deadband and angle-amplification are programmable with external resistors. An internal window-comparator controls the input line. In the case of a fault condition, like short circuit to GND, short circuit to supply-voltage, and broken wire, the TLE4206-2G stops the motor
immediately (brake condition). urthermore the built in features like over- and undervoltage-lockout, short-circuit-protection and over-temperature-protection will open a wide range of automotive- and industrial applications. The TLE4206-2G is a design-version of the TLE4206. In the TLE4206-2G, the current peak blanking Pin is disconnected. A hysteresis is introduced at the lower RANGE
threshold. This allows reliable de-activation of the device by pulling the RANGE input to GND also under critical application conditions.
Summary of Features:
Optimized for headlight beam control applications
Delivers up to 0.8A continuous
Low saturation voltage; typ.1.2V total @ 25°C; 0.4A
Output protected against short circuit
Overtemperature protection with hysteresis
Over- and undervoltage lockout
No crossover current
Internal clamp diodes
Enhanced power packages
Range low-voltage detection with hysteresis
Green Product (RoHS compliant)
AEC Qualified
Benefits:
Amplification and angle shift can be adjusted with external resistors
Range Input to protect reference potentiometer against short circuit
