TAS5342LATIThe TAS5342LA is a high-performance, integrated stereo digital amplifier power stage designed to drive a 4Ω bridge-tied load (BTL) at up to 100W per channel with low harmonic distortion, low integrated noise, and low idle current
￥
0
显示的图像仅供参考，应从产品数据表中获得准确的规格。
TAS5342LATI
制造商:
TI
制造商型号#:
TAS5342LA
百芯编号#:
CM270137823
价格(CNY):
百芯库存:
209
个
库存地点:香港
可供应量:
159
个在库
此为供应商库存，需要与销售确认
产品描述:
The TAS5342LA is a high-performance, integrated stereo digital amplifier power stage designed to drive a 4Ω bridge-tied load (BTL) at up to 100W per channel with low harmonic distortion, low integrated noise, and low idle current
The TAS5342LA is a high-performance, integrated stereo digital amplifier power stage designed to drive a 4-Ω bridge-tied load (BTL) at up to 100 W per channel with low-harmonic distortion, low-integrated noise, and low-idle current.
The TAS5342LA has a complete protection system integrated on-chip, safeguarding the device against a wide range of fault conditions that could damage the system. These protection features are short-circuit protection, over-current protection, under voltage protection, over temperature protection, and a loss of PWM signal (PWM activity detector).
A power-on-reset (POR) circuit is used to eliminate power-supply sequencing that is required for most power-stage designs.
Total Power Output (Bridge Tied Load)
2 × 100 W at 10% THD+N Into 4 Ω
2 × 80 W at 10% THD+N Into 6 Ω
2 × 65 W at 10% THD+N Into 8 Ω
Total Power Output (Single Ended)
4 × 40 W at 10% THD+N Into 3 Ω
4 × 30 W at 10% THD+N Into 4 Ω
Total Power Output (Parallel Mode)
1 × 200 W at 10% THD+N Into 2 Ω
1 × 160 W at 10% THD+N Into 3 Ω
>110 dB SNR (A-Weighted With TAS5518 Modulator)
<0.1% THD+N (1 W, 1 kHz)
Supports PWM Frame Rates of 192 kHz to 432 kHz
Resistor-Programmable Current Limit
Integrated Self-Protection Circuitry, Including:
Under Voltage Protection
Overtemperature Warning and Error
Overload Protection
Short-Circuit Protection
PWM Activity Detector
Standalone Protection Recovery
Power-On Reset (POR) to Eliminate System Power-Supply Sequencing
High-Efficiency Power Stage (>90%) With 110-mΩ Output MOSFETs
Thermally Enhanced Package 44-Pin HTSSOP (DDV)
Error Reporting, 3.3-V and 5-V Compliant
EMI Compliant When Used With Recommended System Design
