The STM32F072CBT6 is a Microcontroller incorporates the high-performance ARM® Cortex®-M0 32-bit RISC core operating at a 48MHz frequency, high-speed embedded memories (up to 128kb of flash memory and 16kb of SRAM) and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (two I²Cs, two SPIs/one I2S, one HDMI CEC and four USARTs), one USB Full speed device (crystal-less), one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven general-purpose 16-bit timers, a 32-bit timer and an advanced-control PWM timer. The STM32F072CBT6 microcontroller operates in the -40 to +85°C and -40 to +105°C temperature ranges from a 2.0 to 3.6V power supply. A comprehensive set of power-saving modes allows the design of low-power applications.
ARM® 32-bit Cortex®-M0 CPU, Frequency up to 48MHz Core
64 to 128kb Flash Memory
16kb SRAM with HW Parity
CRC Calculation Unit
VDDA = VDD to 3.6V Analogue Supply
Power-on/Power Down Reset (POR/PDR)
Sleep, Stop and Standby Low Power Modes
4 to 32MHz Crystal Oscillator
32kHz Oscillator for RTC with Calibration
Internal 8MHz RC with x6 PLL Option
Internal 48MHz Oscillator with Automatic Trimming Based on External Synchronization
All Mappable on External Interrupt Vectors
Up to 68 I/Os with 5V Tolerant Capability
7-channel DMA Controller
One 12-bit, 1.0µs ADC (up to 16 Channels)
0 to 3.6V Conversion Range
Calendar RTC with Alarm and Periodic Wakeup from Stop/Standby
One 16-bit Advanced-control Timer for 6-channel PWM Output
32-bit and Seven 16-bit Timers, with up to 4 IC/OC OCN usable for IR control decoding or DAC control
Independent and System Watchdog Timers
Based on three different tests (ESD, LU) using specific measurement methods, the device is stressed in order to determine its performance in terms of electrical sensitivity.
