SN75HVD07TIThe SN65HVD05, SN75HVD05, SN65HVD06, SN75HVD06, SN65HVD07, and SN75HVD07 combine a 3-state differential line driver and differential line receiver
￥
0
显示的图像仅供参考，应从产品数据表中获得准确的规格。
SN75HVD07TI
制造商:
TI
制造商型号#:
SN75HVD07
百芯编号#:
CM637108164
价格(CNY):
百芯库存:
207
个
库存地点:
可供应量:
135
个在库
此为供应商库存，需要与销售确认
产品描述:
The SN65HVD05, SN75HVD05, SN65HVD06, SN75HVD06, SN65HVD07, and SN75HVD07 combine a 3-state differential line driver and differential line receiver
The SN65HVD05, SN75HVD05, SN65HVD06, SN75HVD06, SN65HVD07, and SN75HVD07 combine a 3-state differential line driver and differential line receiver. They are designed for balanced data transmission and interoperate with ANSI TIA/EIA-485-A and ISO 8482E standard-compliant devices. The driver is designed to provide a differential output voltage greater than that required by these standards for increased noise margin. The drivers and receivers have active-high and active-low enables respectively, which can be externally connected together to function as direction control.
The driver differential outputs and receiver differential inputs connect internally to form a differential input/ output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or not powered. These devices feature wide positive and negative common-mode voltage ranges, making them suitable for party-line applications.
* Minimum Differential Output Voltage of 2.5 V Into a 54- Load
* Open-Circuit, Short-Circuit, and Idle-Bus Failsafe Receiver
* 1/8th Unit-Load Option Available (Up to 256 Nodes on the Bus)
* Bus-Pin ESD Protection Exceeds 16 kV HBM
* Driver Output Slew Rate Control Options
* Electrically Compatible With ANSI TIA/EIA-485-A Standard
* Low-Current Standby Mode: 1 µA Typical
* Glitch-Free Power-Up and Power-Down Protection for Hot-Plugging Applications
* Pin Compatible With Industry Standard SN75176
* APPLICATIONS
Data Transmission Over Long or Lossy Lines or Electrically Noisy Environments
