The SC18IM700IPW,112 is a Master I²C-bus Controller, designed to serve as an interface between the standard UART port of a microcontroller or microprocessor and the serial I²C-bus, this allows the microcontroller or microprocessor to communicate directly with other I²C-bus devices. It can operate as an I²C-bus master. It controls all the I²C-bus specific sequences, protocol, arbitration and timing. The host communicates with SC18IM700IPW,112 with ASCII messages protocol, this makes the control sequences from the host to the SC18IM700IPW,112 become very simple.
UART Host Interface
I²C-bus Controller
Eight Programmable I/O Pins
High-speed UART - Baud Rate up to 460.8kbps
400kbps High-speed I²C-bus
16-byte TX FIFO
16-byte RX FIFO
Programmable Baud Rate Generator
Sleep Mode (Power-down)
UART Message Format Resembles I²C-bus Transaction Format
I²C-bus Master Functions
Multi-master Capability
5V Tolerance on Input Pins
8-in-1 UART Format (8 Data Bits, No Parity Bit, 1 Stop Bit)
