The PCM2912A is the Texas Instruments single-chip, USB stereo audio codec with a USB, 2.0-compliant, full-speed protocol controller and an analog front-end (AFE) function for headset applications.
The USB protocol controller works with no software code, but USB descriptors can be modified on request. The PCM2912A employs SpAct™ architecture, TI’s unique system that recovers the audio clock from USB packet data. On-chip analog PLLs with SpAct enables independent playback and record sampling rates with low clock jitters.
Features
• On-Chip USB Interface:
– With Full-Speed Transceivers
– Fully Compliant With USB 2.0 Specification
– Certified By USB-IF
– Partially Programmable Descriptors
– Adaptive Isochronous Transfer for Playback
– Asynchronous-Isochronous Transfer for Record
– Bus Powered
• 16-Bit Delta-Sigma ADC and DAC
• Sampling Rate:
– 8, 11.025, 16, 22.05, 32, 44.1, or 48 kHz
• On-Chip Clock Generator:
– With Single 6-MHz Clock Source
• Mono ADC with Microphone Input
– Analog Performance at VBUS = 5 V:
– THD+N: 0.01%
– SNR: 92 dB
– Dynamic Range: 90 dB
– Decimation Digital Filter
– Passband Ripple: ±0.05 dB
– Stop-Band Attenuation: –65 dB
– Single-Ended Voltage Input
– Antialiasing Filter Included
– Digital HPF Included
– Microphone Bias, Microphone Amplifier, and Input PGA
