The OPA4820 provides a wideband, unity-gain stable, voltage-feedback amplifier with a very low input noise voltage and high output current using a low 5.7mA/ch supply current. At unity-gain, the OPA4820 gives > 600MHz bandwidth with < 1 dB peaking. The OPA4820 complements this high-speed operation with excellent DC precision in a low-power device. A worst-case input offset voltage of ±0.8mV and an offset current of ±500nA give excellent absolute DC precision for pulse amplifier applications.
Minimal input and output voltage swing headroom allow the OPA4820 to operate on a single +5V supply with > 2VPP output swing. While not a rail-to-rail (RR) output, this swing will support most emerging analog-to-digital converter (ADC) input ranges with lower power and noise than typical RR output op amps.
Exceptionally low dG/dP (0.01%/0.03°) supports low-cost composite video line driver applications. Existing designs can use the industry-standard quad pinout SO-14 package while emerging high-density portable applications can use the TSSOP-14.
HIGH BANDWIDTH: 220MHz (G = +2)
HIGH OUTPUT CURRENT: ±85mA
LOW INPUT NOISE: 2.5nV/Hz
LOW SUPPLY CURRENT: 5.7mA/ch
FLEXIBLE SUPPLY VOLTAGE:
±2V to ±6.3V Dual Supply
+4V to +12.6V Single Supply
EXCELLENT DC ACCURACY:
Maximum 25°C Input Offset Voltage = 0.8mV
Maximum 25°C Input Offset Current = 500nA
APPLICATIONS
LOWCOST VIDEO LINE DRIVERS
ADC PREAMPS
ACTIVE FILTERS
LOWNOISE INTEGRATORS
PORTABLE TEST EQUIPMENT
OPTICAL CHANNEL AMPLIFIERS
LOWPOWER, BASEBAND AMPLIFIERS
CCD IMAGING CHANNEL AMPLIFIERS
OPA4650 UPGRADE
All trademarks are the property of their respective owners.