The OPA2132PA is a high speed, FET input, dual operational amplifier in 8 pin DIP package. It provides high speed and excellent DC performance. The combination of high slew rate and wide bandwidth provides fast settling time. Input cascade circuitry provides excellent common mode rejection and maintains low input bias current over its wide input voltage range. The OPA2132PA is stable in unity gain and provides excellent dynamic behaviour over wide range of load conditions including high load capacitance. The device has completely independent circuitry for lowest crosstalk and freedom from interaction even when overdriven or overloaded.
Gain bandwidth product of 8MHz
HIGH slew rate of 20V/µs
Input bias current of 50pA
Low input voltage noise of 8nV/Hz at f = 1KHz
Low distortion of 0.00008%
Open loop voltage gain of 120dB at RL = 600 ohm
Operating voltage range from ±2.5V to ±18V
Input offset voltage of ±0.5mV
Common mode rejection ratio (CMRR) of 94dB
Operating temperature range from -40°C to 85°C
This integrated circuit can be damaged by ESD. Failure to observe proper handling and installation procedures can cause damage.
