MAX5590BEUG+Maxim IntegratedMAXIM INTEGRATED PRODUCTS MAX5590BEUG+ Digital to Analog Converter, Buffered, Fast Settling, Voltage Output, 12Bit, Serial, 2.7V to 5.25V
￥
88.27
显示的图像仅供参考，应从产品数据表中获得准确的规格。
MAX5590BEUG+Maxim Integrated
制造商:
Maxim Integrated
制造商型号#:
MAX5590BEUG+
百芯编号#:
CM59268800
价格(CNY):
￥
88.27
百芯库存:
181
个
库存地点:
可供应量:
157
个在库
此为供应商库存，需要与销售确认
产品类别:
DA转换器,数模
产品描述:
MAXIM INTEGRATED PRODUCTS MAX5590BEUG+ Digital to Analog Converter, Buffered, Fast Settling, Voltage Output, 12Bit, Serial, 2.7V to 5.25V
The MAX5590BEUG+ is a buffered, fast-settling, octal, 12bit, voltage-output digital to analogue converter (DAC) in 24 pin TSSOP package. It operate from a +2.7V to +5.25V analogue supply and a separate +1.8V to +5.25V digital supply. The 20MHz 3-wire serial interface is compatible with SPI, QSPI, MICROWIRE and digital signal processor (DSP) protocol applications. It share a common serial interface in direct-access or daisy-chained configuration. It provides two multifunction, user-programmable, digital I/O ports. The externally selectable power-up states of the DAC outputs are either zero scale, midscale or full scale. Software-selectable FAST and SLOW settling modes decrease settling time in FAST mode or reduce supply current in SLOW mode. It is used in automatic test equipment (ATE), digital offset and gain adjustment, automatic tuning, programmable attenuators and power amplifier control.
Supply voltage range is 2.7V to 5.25V
Operating temperature range from -40°C to 85°C
3µs (max) 12bit settling time to 1/2LSB, integral nonlinearity is 1LSB (max)
Monotonic, ±1LSB (max) DNL
Glitch-free outputs power-up to zero scale, midscale or full scale controlled by PU pin
Unity-gain or force-sense-configured output buffers
PSRR of 200µV/V, wake-up time of 40µs
Voltage-output slew rate is 3.6V/µs at fast mode, shutdown supply current is 1µA(max)
DAC to DAC crosstalk of 15nVs, operating supply current is 8mA at unity gain (FAST mode)
