MAX4656EUA+Maxim IntegratedMAXIM INTEGRATED PRODUCTS MAX4656EUA+ Analog Switch, High Current, SPST - NO, 1Channels, 22Ω, 9V to 40V, ± 4.5V to ± 20V, µMAX
¥
19.96
显示的图像仅供参考,应从产品数据表中获得准确的规格。
MAX4656EUA+Maxim Integrated
制造商:
Maxim Integrated
制造商型号#:
MAX4656EUA+
百芯编号#:
CM57951366
价格(CNY):
¥
19.96
百芯库存:
208
个
库存地点:
可供应量:
156
个在库
此为供应商库存,需要与销售确认
产品类别:
模拟,开关芯片
产品描述:
MAXIM INTEGRATED PRODUCTS MAX4656EUA+ Analog Switch, High Current, SPST - NO, 1Channels, 22Ω, 9V to 40V, ± 4.5V to ± 20V, µMAX
The MAX4656EUA+ is a high-current, SPST, CMOS analogue switch in 8 pin µMAX package. This is a medium-voltage CMOS analogue switch with low on-resistance of 10 ohm (max), specifically designed to handle large switch currents. With a switch capability of up to 400mA peak current, 300mA continuous current and it can switch loads as low as 25R. It can replace reed relays with a million times the speed and virtually unlimited number of lifetime cycles. Normal power consumption is only 3mW, whether the switch is on or off. This IC is TTL/CMOS compatible and will switch any voltage within its power supply range. This device is used in relay replacement, test equipment, communication systems, xDSL modems, PBX, PABX systems, PC multimedia boards and redundant/backup systems.
Supply voltage range is 9V to 40V, ±4.5V to ±20V
Operating temperature range from -40°C to 85°C
Normally open (NO) switch, maximum on-resistance is 22ohm at TA = +25°C (single supply)
High continuous current of 300mA
High peak current handling of 400mA
VL (logic supply) not required
RON flatness over specified signal range is 1ohm (dual supply)
Rail to rail signal handling
Pin compatible with DG417, DG418
Charge injection is 23pC, -3dB bandwidth is 210MHz at TA=+25°C (dual supply)