MAX2830Maxim Integrated2.4GHz to 2.5GHz 802.11g/b RF Transceiver with PA and Rx/Tx/Diversity SwitchIndustry"s First 802.11g/b RF Transceiver with Integrated PA, Rx/Tx and Antenna Diversity Switches
¥
0
显示的图像仅供参考,应从产品数据表中获得准确的规格。
MAX2830Maxim Integrated
制造商:
Maxim Integrated
制造商型号#:
MAX2830
百芯编号#:
CM1436208106
价格(CNY):
百芯库存:
201
个
库存地点:
可供应量:
173
个在库
此为供应商库存,需要与销售确认
产品描述:
2.4GHz to 2.5GHz 802.11g/b RF Transceiver with PA and Rx/Tx/Diversity SwitchIndustry"s First 802.11g/b RF Transceiver with Integrated PA, Rx/Tx and Antenna Diversity Switches
The MAX2830 direct conversion, zero-IF, RF transceiver is designed specifically for 2.4GHz to 2.5GHz 802.11g/b WLAN applications. The MAX2830 completely integrates all circuitry required to implement the RF transceiver function, providing an RF power amplifier (PA), an Rx/Tx and antenna diversity switch, RF-to-baseband receive path, baseband-to-RF transmit path, voltage-controlled oscillator (VCO), frequency synthesizer, crystal oscillator, and baseband/control interface. The MAX2830 includes a fast-settling sigma-delta RF synthesizer with smaller than 20Hz frequency steps and a digitally tuned crystal oscillator allowing use of a low-cost crystal. No I/Q calibration is required; however, the device also integrates on-chip DC-offset cancellation and I/Q errors and carrier leakage-detection circuits for improved performance. Only an RF bandpass filter (BPF), crystal, a pair of baluns, and a small number of passive components are needed to form a complete 802.11g/b WLAN RF front-end solution.
The MAX2830 completely eliminates the need for an external SAW filter by implementing on-chip monolithic filters for both the receiver and transmitter. The baseband filters are optimized to meet the IEEE® 802.11g standard and proprietary turbo modes up to 40MHz channel bandwidth. These devices are suitable for the full range of 802.11g OFDM data rates (6Mbps to 54Mbps) and 802.11b QPSK and CCK data rates (1Mbps to 11Mbps). The ICs are available in a small, 48-pin TQFN package measuring only 7mm x 7mm x 0.8mm.