MAX17048Maxim Integrated3μA 1-Cell/2-Cell Fuel Gauge with ModelGaugeMaximize Battery Run Time with Industry"s Smallest Size, Lowest Power Fuel Gauges that Eliminate a Current-Sense Resistor
￥
0
显示的图像仅供参考，应从产品数据表中获得准确的规格。
MAX17048Maxim Integrated
制造商:
Maxim Integrated
制造商型号#:
MAX17048
百芯编号#:
CM1436251200
价格(CNY):
百芯库存:
225
个
库存地点:
可供应量:
160
个在库
此为供应商库存，需要与销售确认
产品描述:
3μA 1-Cell/2-Cell Fuel Gauge with ModelGaugeMaximize Battery Run Time with Industry"s Smallest Size, Lowest Power Fuel Gauges that Eliminate a Current-Sense Resistor
The MAX17048/MAX17049 ICs are tiny, micropower current fuel gauges for lithium-ion (Li+) batteries in handheld and portable equipment. The MAX17048 operates with a single lithium cell and the MAX17049 with two lithium cells in series.
The ICs use the sophisticated Li+ battery-modeling algorithm ModelGauge™ to track the battery relative state-of-charge (SOC) continuously over widely varying charge and discharge conditions. The ModelGauge algorithm eliminates current-sense resistor and battery-learn cycles required in traditional fuel gauges. Temperature compensation is implemented using the system microcontroller.
The ICs automatically detect when the battery enters a low-current state and switches into a low-power 3µA hibernate mode, while still providing accurate fuel gauging. The ICs automatically exit hibernate mode when the system returns to active state.
On battery insertion, the ICs debounce initial voltage measurements to improve the initial SOC estimate, thus allowing them to be located on system side. SOC, voltage, and rate information is accessed using the I2C interface. The ICs are available in a tiny 0.9mm × 1.7mm, 8-bump wafer-level package (WLP), or a 2mm × 2mm, 8-pin TDFN package.
