The LV8811G is a 3-phase BLDC motor driver which is controlled by single Hall sensor. A 180 degrees sinusoidal driving method is adopted and the IC can control motor with low vibration and the low noise. In addition, lead-angle adjustment is possible by an external pin. Lead-angle value and lead-angle slant can be adjusted independently. Thus, the device can be driven by high efficiency and low noise with various motors. The power element to drive a motor is built-in and contributes to high efficiency by low on resistance (0.5 Ω). The Hall sensor bias driver is equipped, and a Hall IC is supported as well. As a method of the rotary speed control of the motor, direct-PWM pulse input or DC-voltage input can be chosen.
Features | | Benefits
---|---|---
| | | | |
3-phase full wave (sinusoidal) drive
| |
Static sound, low vibration, high efficiency
Any practical combination of slot and pole can be handled. (e.g. 3S3P, 3S4P, 6S4P, 6S8P, 12S8P, 9S12P and so on)
| |
Versatility
built-in power FETs (P-MOS/N-MOS)
| |
Part mark reduction. The implementation area small
Speed control function by direct PWM or DC voltage input
| |
Speed control is possible by two methods.(selectable)
Minimum input PWM duty cycle can be configured by voltage input
| |
It is contributed to movement stability
Soft start-up function and soft shutdown function
| |
It is contributed to static sound characteristics at the time of the start
Soft PWM duty cycle transitions
| |
Static sound characteristics at the time of the speed abnormality are good
Built-in current limit circuit and thermal protection circuit
| |
Safe use is provided by a protection function
Regulated voltage output pin for Hall sensor bias
| |
A PCB design is easy
Built-in locked rotor protection and auto recovery circuit
| |
Safe use is provided by a protection function
FG signal output
| |
A measurement of the number of revolutions is possible
Dynamic lead angle adjustment with respect to rotational speed
| |
High efficiency
Lead-angle control parameters can be configured by voltage inputs
