The LM34922 Constant On-time Step-Down Switching Regulator features all the functions needed to implement a low cost, efficient, buck bias regulator capable of supplying up to 2A of load current. This voltage regulator contains an N-Channel Buck switch, a startup regulator, current limit detection, and internal ripple control. The constant on-time regulation principle requires no loop compensation, results in fast load transient response, and simplifies circuit implementation. The operating frequency remains constant with line and load. The adjustable valley current limit detection results in a smooth transition from constant voltage to constant current mode when current limit is reached, without the use of current limit foldback. The PGD output indicates the output voltage has increased to within 5% of the expected regulation value. Additional features include: Low output ripple, VIN under-voltage lock-out, adjustable soft-start timing, thermal shutdown, gate drive pre-charge, gate drive under-voltage lock-out, and maximum duty cycle limit.
Input Operating Voltage Range: 6V to 28V
Absolute Maximum Input Rating: 30V
Integrated 2A N-Channel Buck Switch
Adjustable Current Limit Allows for Smaller Inductor
Adjustable Output Voltage from 2.51V
Minimum Ripple Voltage at VOUT
Power Good Output
Switching Frequency Adjustable to 1MHz
COT Topology Features:
Switching Frequency Remains Nearly Constant with Load Current and Input Voltage Variations
Ultra-Fast Transient Response
No Loop Compensation Required
Stable Operation with Ceramic Output Capacitors
Allows for Smaller Output Capacitor and Current Sense Resistor
Adjustable Soft-Start Timing
Thermal Shutdown
Precision 2% Feedback Reference
All trademarks are the property of their respective owners.
