The JN5168-001-M00 is an ultra low power, high performance surface mount modules targeted at IEEE 802.15.4, ZigBee Light Link, ZigBee Smart Energy and RF4CE networking applications, enabling users to realise products with minimum time to market and at the lowest cost. They remove the need for expensive and lengthy development of custom RF board designs and test suites. The modules use NXP"s JN5168 wireless microcontroller to provide a comprehensive solution with large memory, high CPU and radio performance and all RF components included. All that is required to develop and manufacture wireless control or sensing products is to connect a power supply and peripherals such as switches, actuators and sensors, considerably simplifying product development.
Four module variants are available: JN5168-001-M00 with an integrated antenna, JN5168-001-M03 with an antenna connector and the JN5168-001-M05 and M06 with an antenna connector, power amplifier and LNA for extended range. The JN5168-001-M05 output power has been optimised for use in Europe and Asia.
For support documentation, please click here
MoreLess
## Features
### Features: Module
* 2.4 GHz IEEE 802.15.4, ZigBee Light Link, ZigBee Smart Energy and RF4CE compatible
* **JN5168-001-M00**
* up to 1 km range (Ext antenna)
* Integral antenna 16 x 30 mm
* TX power +2.5 dBm
* Receiver sensitivity –95 dBm
* TX current 15.3 mA
* RX current 17 mA
* 2.0 V - 3.6 V operation
### Features: Microcontroller
* 32-bit RISC CPU, up to 32 MIPs with low power
* Data EEPROM with guaranteed 100 k write operations
* RF4CE, ZigBee Smart Energy stacks
* JTAG debug interface
* 4-input 10-bit ADC, 1 comparator
* 5 x PWM (4 x timer, 1 x timer/counter)
* 2 UARTs
* SPI Master and Slave port with 3 selects
* 2-wire serial interface
* Battery and Temperature Sensor
* Watchdog timer and BOR
* Up to 20 DIO
* Industrial temperature (-40 °C to +85 °C)
* Lead-free and RoHS compliant
### Benefits
* Microminiature module solutions
* Ready to use in products
* Minimises product development time
* No RF test required for systems
* Compliant with:
* FCC 47CFR Part 15C
* IC Canada RSS 210 Issue 8 - Annex 8
* ETSI EN 300-328 V1.7.1
* EN 301-489-17 V2.1.1
* EN60950-1-2006 +A1, A11, A12
## Target Applications
* Robust and secure low power wireless applications
