* Bi-Directional Interface between Two Levels * 1.1V and 3.6V * Fully Configurable * Inputs and Outputs Track VCC Level * Non-Preferential Power-up; Either VCC May Be Powered-up First * Outputs Remain in 3-State until Active VCC Level is Reached * Outputs Switch to 3-State if Either VCC is at GND * Power-Off Protection * Bus HOLD on Data Inputs Eliminates Need for Pull-up Resistors (Do NOT Use Resistors on the A or B Ports) * OE and CLK IN are Referenced to VCCA Voltage * Packaged in 16-Terminal DQFN (2.5mm x 3.5mm) * Direction Control Not Needed * 80Mbps Throughput Translating between 1.8V and 2.5V * ESD Protection Exceeds * 12kV HBM (B port I/O to GND) (per JESD22-A114 & Mil Std 883e 3015.7) * 8kV HBM (A port I/O to GND) (per JESD22-A114 & Mil Std 883e 3015.7) * 1kV CDM (per ESD STM 5.3)