The DEMO9S08DZ60 is a demo board for MC9S08DZ60 microcontroller. The MC9S08DZ60 microcontroller provide significant value to customers looking to combine controller area network (CAN) and embedded EEPROM in their applications. This combination will provide lower costs, enhanced performance and higher quality. The MC9S08DZ60 improves low voltage/low power performance without sacrificing CPU performance. This MCU is created by an advanced wafer fabrication process that gives MC9S08DZ60 a normal operating voltage of 2.7V to 5.5V. As a result, MC9S08DZ60 is capable of higher bus speeds at lower operating voltages. The DEMO9S08DZ60 board operates in two operating modes, run mode and debug mode. The run mode executes the user application from power on or reset and debug mode supports the development and debug of applications.
BDM_PORT header for BDM cable support
32KB flash
4KB RAM
2KB EEPROM
Integrated P&E USB BDM
Onboard +5V regulator
LIN PHY with two, 4 position Molex connectors
Two user, one reset push switches
14 position DIP switch
Power input from USB BDM
ESD sensitive device, take proper precaution while handling the device.
In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.
