sales@aipcba.com
CN
电子元器件采购 > 时钟,缓冲器,驱动器,锁相环 > TI >

CDC3S04YFFR 库存 & 价格

TI Clock Fanout Buffer 4Out 1IN 1:4 20Pin DSBGA T/R
20.19
CDC3S04YFFR
显示的图像仅供参考,应从产品数据表中获得准确的规格。
CDC3S04YFFR TI
TI
  • 制造商:
    TI
  • 制造商型号#:
    CDC3S04YFFR
  • 百芯编号#:
    CM17421033
  • 价格(CNY):
    20.19
  • 百芯库存:
    200
  • 可供应量:
    150 个在库
    此为供应商库存,需要与销售确认
  • 产品类别:
    时钟,缓冲器,驱动器,锁相环
  • 产品描述:
    Clock Fanout Buffer 4Out 1IN 1:4 20Pin DSBGA T/R
  • 文档: 3D模型
CDC3S04YFFR 购买 CDC3S04YFFR 库存和价格更新于 2025-06-16 03:50:22
  • 刷新
    器件型号: CDC3S04YFFR
    百芯编号: CM17421033
    制造商: TI
    封装: DSBGA-20
    价格
    20.19
    总计: 350
    MOQ: 1
    库存地点: 香港
    发货日期: 2025/06/21 (预期 )
  • 购买
    *由于库存数量、价格不断波动,请 联系我们 获取型号最新价格和库存。

    元器件库存查询

    库存查询
    百芯库存涵盖100,000个元器件
    欺诈预防提醒
    近日,我们发现不法分子冒充百芯智造进行诈骗或试图低价销售假冒和故障元器件。
    百芯智造在2021年建立了一个 元器件检测实验室 ,旨在提供有质量保证的组件。
    我们强烈建议客户选择可靠的元器件供应商。
    请注意,唯一电子邮件后缀是 aipcba.com
    CDC3S04YFFR 规格 显示相似产品 (99+)
    类型
    描述
    选择
    制造商
    TI
    类别
    时钟,缓冲器,驱动器,锁相环
    3D模型
     3D模型
    安装方式
    Surface Mount
    引脚数
    20 Pin
    封装
    DSBGA-20
    频率
    52 MHz
    电源电压(DC)
    1.80 V
    输出接口数
    4 Output
    供电电流
    2.00 mA
    电路数
    1 Circuit
    输入电流
    2.00 mA
    工作温度(Max)
    85 ℃
    工作温度(Min)
    -30 ℃
    电源电压
    1.65V ~ 1.95V
    电源电压(Max)
    1.95 V
    电源电压(Min)
    1.65 V
    显示相似产品
    CDC3S04YFFR 数据规格书
    CDC3S04YFFR 数据手册Datasheet
    25 Pages, 1291 KB
    2012/09/01
    查看
    CDC3S04YFFR 数据手册Datasheet
    27 Pages, 1544 KB
    2016/02/06
    查看
    CDC3S04YFFR 数据手册Datasheet
    27 Pages, 1544 KB
    2016/10/29
    查看
    CDC3S04YFFR 数据手册Datasheet
    27 Pages, 1544 KB
    2016/03/29
    查看
    CDC3S04YFFR 数据手册Datasheet
    27 Pages, 1544 KB
    2016/01/16
    查看
    CDC3S04YFFR 数据手册Datasheet
    26 Pages, 1534 KB
    查看
    CDC3S04YFFR 数据手册Datasheet
    546 Pages, 4917 KB
    -0001/11/30
    查看
    CDC3S04YFFR 数据手册Datasheet
    27 Pages, 1544 KB
    2016/03/20
    查看
    CDC3S04YFFR 数据手册Datasheet
    27 Pages, 1544 KB
    2015/09/05
    查看
    CDC3S04YFFR 其它数据手册Datasheet
    142 Pages, 797 KB
    查看
    CDC3S04YFFR 其它数据手册Datasheet
    28 Pages, 1247 KB
    查看
    CDC3S04YFFR 其它数据手册Datasheet
    27 Pages, 1544 KB
    查看
    CDC3S04YFFR 其它数据手册Datasheet
    6 Pages, 1029 KB
    2014/04/09
    查看
    CDC3S04YFFR 其他参考文件
    1 Pages, 153 KB
    2011/06/15
    查看
    尺寸 & 包装
    类型
    描述
    高度
    0.33 mm
    工作温度
    -30℃ ~ 85℃
    产品生命周期
    Active
    包装方式
    Tape & Reel (TR)
    符合标准
    类型
    描述
    RoHS标准
    RoHS Compliant
    含铅标准
    Lead Free
    REACH SVHC标准
    No SVHC
    REACH SVHC版本
    2015/06/15
    出口分类
    类型
    描述
    ECCN代码
    EAR99
    产品概述
    • The CDC3S04 is a four-channel low-power low-jitter sine-wave clock buffer. It can be used to buffer a single master clock to multiple peripherals. The four sine-wave outputs (CLK1–CLK4) are designed for minimal channel-to-channel skew and ultralow additive output jitter.
    • Each output has its own clock request inputs which enables the dedicated clock output. These clock requests are active-high (can also be changed to be active-low via I2C), and an output signal is generated that can be sent back to the master clock to request the clock (MCLK_REQ). MCKL_REQ is an open-source output and supports the wired-OR function (default mode). It needs an external pulldown resistor. MCKL_REQ can be changed to wired-AND or push-pull functionality via I2C.
    • The CDC3S04 also provides an I2C interface (Hs-mode) that can be used to enable or disable the outputs, select the polarity of the REQ inputs, and allow control of internal decoding.
    • The CDC3S04 features an on-chip high-performance LDO that accepts voltages from 2.3 V to 5.5 V and outputs a 1.8-V supply. This 1.8-V supply can be used to power an external 1.8-V TCXO. It can be enabled or disabled for power saving at the TCXO.
    • A low signal at the RESET input switches the outputs CLK1 and CLK4 into the default state. In this configuration, CLK1 and CLK4 are ON (see ); the remaining device function is not affected. Also, the RESET input provides a glitch filter which rejects spikes of typical 300 ns on the RESET line to preserve false reset. A complete device reset to the default condition can be initiated by a power-up cycle of VDD_DIG.
    • The CDC3S04 operates from two 1.8-V supplies. There is a core supply (VDD_DIG/GND_DIG) for the core logic and a low-noise analog supply (VDD_ANA/GND_ANA) for the sine-wave outputs. The CDC3S04 is designed for sequence-less power up. Both supply voltages may be applied in any order.
    • The CDC3S04 is offered in a 0.4-mm pitch WCSP package (1.6 mm × 2 mm) and is optimized for low standby current (0.5 µA). It is characterized for operation from –40°C to 85°C.

    百芯智造认证

    百芯智造承诺产品质量和安全通过ISO 9001、ISO 13485、ISO 45001、UL、RoHS、CQC 和 REACH 认证
    查看我们的认证 >
    订购详情及相关信息
    •  此处条款仅供参考,实际条款以销售报价为准。
      - 订购时请确认产品规格。
      - MOQ 是指购买每个零件所需的最小起订量。
      - 如果您有特殊的订购说明,请在订购页面注明。
      - 装运前会进行检验 (PSI)。
      - 您可以随时给我们发邮件查询订单状态。
      - 包裹发货后无法取消订单。
    • - 提前电汇(银行转账),也可选择PayPal。
      - 仅限现金转账。(不接受支票和账单转账。)
      - 客户负责支付所有可能的费用,包括销售税、增值税和海关费用等。
      - 如果您需要详细的发票或税号,请给我们发送电子邮件。
    • - 可选择顺丰或跑腿。
      - 您可以选择是通过您的运费帐户收取运费还是由我们收取。
      - 偏远地区请提前与物流公司确认。
      (在这些地区送货可能会收取额外费用(35-50 美元)。)
      - 交货日期:通常为 2 到 7 个工作日。
      - 您的订单发货后将发送跟踪号。
    • - 由百芯智造仓库仔细检查和包装
      - 真空包装
      - 防静电包装
      - 防震泡沫
    • - 收入质量控制 (IQC),800多家合格经销商。
      - 500m² 高级元器件检测实验室、假冒检测、RoHS 合规性等
      - 2000㎡数码元器件仓库,恒温恒湿
      - 开盖检查
      - X-Ray检查
      - XRF检查
      - 电气测试
      - 外观检测
    • - 不合格和假冒检测
      - 故障分析
      - 电气测试
      - 生命周期和可靠性测试
      -百芯2021年成立元器件检测实验室
      了解更多 >

    电子元件供应服务

    立即查看
    SN:H3.52769LO50420V302Q0QC0S0
    在线联系我们
    黄经理 - 百芯智造销售经理在线,5 分钟前
    您的邮箱 *
    消息 *
    发送