* Low value clamp capacitance can be used (Min. 3000 pF Recommended 0.01 pF (FZ) ceramic capacitor) * Low voltage operation is possible (Operating range 4.0~7.0V) * Superimposed can be applied since switching speed of SW is fast and there is little switching noise (Typ. 70ns) * Low power consumption (Typ. 25mW when Vcc=5V) * Large dynamic range (Typ. 3.1 VP.P when Vcc=5V) * Good frequency characteristics (Typ. 10 MHz 0 dB) * Low interchannel crosstalk (Typ. -70 dB) * Voltage can be applied to the CTL pin without a VCC voltage. * Power Dissipation: 350mW