ATSAMA5D33-EK is a full featured evaluation platform for the SAMA5D33 embedded microprocessor. The SAMA5D3 series is a high performance, power efficient embedded MPU based on the ARM Cortex-A5 processor, achieving 536MHz with power consumption levels below 0.5mW in low power mode. The evaluation kit allows users to extensively evaluate, prototype and create application specific designs. The kit consists of a main board and a computer module equipped with a SAMA5D33 processor. The main board (MB) provides all the interface connectors required to attach the system to the application specific peripherals. The computer module (CM) board, is a single board computer that integrates all the core components and is mounted onto an application specific main board (MB). It is supported by the SAMA5D3 Softpack, a free set of bare metal C examples, and is delivered with on board demos for Linux and Qt-based GUI.
SAMA5D33 embedded MPU running at 536MHz in a BGA324 package
4GB DDR2, 2GB NAND Flash, 128MB NOR , 32MB SPI serial dataFlash, 512KB EEPROM
JLink and CDC on board, optional JTAG test access port
RGMII Ethernet 1Gb w/PHY
Four wire RS232
Two USB 2.0 Hosts, one USB 2.0 Host/Device
Conexant CX20548 SmartDAA for soft modem implementation
MicroSD card slot
MMC/MMC+/SD/SDIO/CE-ATA
Headphone output, line in and microphone
Strongly recommend using a grounding strap or similar ESD protective device when handling the board in hostile ESD environments.
