The ADIS16060/PCBZ is an iSensor digital gyroscope evaluation board that provide convenient access to the ADIS16060 family of products, using a standard 2mm, 2 × 6 connector interface. These connectors can be accessed using a variety of cable options, including standard 1mm ribbon cables. The ADIS16060/PCB is designed to be evaluated in an existing digital platform (such as MCU, DSP, FPGA, PLD) or as part of the ADISEVAL system. The ADIS16060"s digitized outputs can be accessed using the 4 wire serial port interface (SPI) signals on J1: SCLK, CS, DOUT, and DIN. Auxiliary functions, such as the 12bit ADC input, can be accessed using J2. C1 provides additional power supply filtering but is generally not required.
Complete angular rate digital gyroscope 14bit resolution
Scalable measurement range: Initial range of ±80°/sec (typical)
High vibration rejection over wide frequency
2000g powered shock survivability
1KHz bandwidth Selectable using external capacitor
Externally controlled self test
Internal temperature sensor output
Dual auxiliary 14bit ADC inputs
Absolute rate output for precision applications
ESD sensitive device, take proper precaution while handling the device.
ADIS16060/PCB is not reverse polarity protected. Reversing the power supply or applying inappropriate voltages to any pin may damage the ADIS16060/PCB.
