The ADG5209BRUZ is a monolithic CMOS Analog Multiplexer comprising four differential channels. The ADG5209 switches one of four differential inputs to a common differential output, as determined by the 2-bit binary address lines, A0 and A1. An EN input on both devices enables or disables the device and when EN is disabled, all channels switch off. The ultralow capacitance and charge injection of these switches make them ideal solutions for data acquisition and sample-and-hold applications, where low glitch and fast settling are required. Fast switching speed coupled with high signal bandwidth make these devices suitable for video signal switching. Each switch conducts equally well in both directions when on and each switch has an input signal range that extends to the power supplies. In the off condition, signal levels up to the supplies are blocked. The device does not have VL pins, instead, the logic power supply is generated internally by an on-chip voltage generator.
VSS to VDD analog signal range
Latch-up proof
2.9pF OFF source capacitance
34pF OFF drain capacitance
0.2pC Typical charge injection
160R typical Low ON resistance
Fully specified at ±15V, ±20V, +12V and +36V
HBM ESD rating - 8kV I/O port to supplies, 2kV I/O port to I/O port, 8kV all other pins
