The ADC08B200 is a high speed analog-to-digital converter (ADC) with an integrated capture buffer. The 8-bit, 200 MSPS A/D core is based upon the proven ADC08200 with integrated track-and-hold and is optimized for low power consumption. This device contains a selectable size capture buffer of up to 1,024 bytes that allows fast capture of an input signal with a slower readout rate. An on-chip clock PLL circuit provides the option of on-chip clock rate multiplication to provide the high speed sampling clock.
The ADC08B200 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08B200"s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfacing with 2.7V to 3.3V logic. The digital inputs and outputs are low voltage TTL/CMOS compatible and the output data format is straight binary.
The ADC08B200Q runs on an Automotive Grade Flow and is AEC-Q100 Grade 2 Qualified.
The ADC08B200 is offered in a 48-pin plastic package (TQFP) and is specified over the extended industrial temperature range of −40°C to +105°C. An evaluation board is available to assist in the easy evaluation of the ADC08B200.
Single-Ended Input
Selectable Capture Buffer Size
PLL for Clock Multiplication
Reference Ladder Top and Bottom Accessible
Linear Power Scaling with Sample Rate
FPGA Training Pattern
AEC-Q100 Grade 2 Qualified
Power-Down Feature
## Key Specifications
(PLL Bypassed)
Resolution 8 Bits
Maximum Sampling Frequency 200 MSPS (min)
DNL ±0.4 LSB (typ)
ENOB (fIN= 49 MHz) 7.2 bits (typ)
THD (fIN= 49 MHz) −53 dBc (typ)
Power Consumption
Operating (50 MHz) Input 2 mW / Msps (typ)
Power Down 2.15 mW (typ)
All trademarks are the property of their respective owners.
