The AD7922ARMZ is a 2-channel 12-bit high speed low power successive approximation Analog-to-digital Converter (ADC) operates from a single 2.35 to 5.25V power supply and feature throughput rates of up to 1MSPS. The parts contain a low noise, wide bandwidth track-and-hold amplifier, which can handle input frequencies in excess of 6MHz. The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors or DSPs. The conversion rate is determined by the SCLK signal. The input signal is sampled on the falling edge of CS and the conversion is also initiated at this point. The channel to be converted is selected through the DIN pin and the mode of operation is controlled by CS. The serial data stream from the DOUT pin has a channel identifier bit and mode identifier bit, which provide information about the converted channel and the current mode of operation.
Low power
Wide input bandwidth
Flexible power/serial clock speed management
No pipeline delays
High speed serial interface - SPI™/QSPI™/MICROWIRE™/DSP compatible